| Plate |
Non-ablative, positive working, thermal digital plate with wide operating latitude,
optional postbake for extremely long runs and resistance to aggressive press
chemistry such as UV inks and blanket washes.
|
| Gauge |
0.15mm (.006”), 0.20mm (.008”), 0.30mm (.012”) and
0.40mm (.015”) |
| Spectra sensitivity |
800-850 nm |
| Platesetter compatibility |
Kodak Trendsetter, Kodak Lotem, Kodak Magnus Platesetters, Screen PT-R Platesetters, Heidelberg Topsetter, Suprasetter Platesetters, and Luscher Xpose! Platesetters
|
| Laser energy required |
140 mJ/cm2
-
160 mJ/cm2
|
| Resolution |
1% to 99% @ 250 lpi |
| FM capability |
10 micron stochastic
|
| Processors |
Any suitable processors for positive thermal plates |
| Developer |
Recommended to use GSP90 Positive Plate Developer and GSP90 Positive Plate Developer |
| Plate finisher |
Recommended to use ML140G Plate Finisher |
| Processing |
25 seconds time at (+/-5)23°C (+/-1)
|
| Baking conditions |
Apply ML140B Baking Gum before baking
- Static oven: 220 – 230°C for a duration of 3 – 5 minutes
- Online oven: 240°C for a duration of 4 minutes |
| Run length |
200,000 impressions unbaked, 1,500,000 impressions baked.
250,000 impressions with UV or
EB inks after post baking.
(Actual run length may vary according to press, ink and paper conditions) |
| Safelight |
None required - daylight handling |
| Shelf life |
12 months, under recommended storage conditions |
| Packaging |
Available in all standard formats, including bulk and Auto Pallet Loader (APL) formats |
| Transport and storage |
Unopened plate packs should be stored flat and away from excessive cold, heat and
humidity. Use in a controlled environment of 10° - 26°C and 40-80% RH,
non-condensing. |
| Availability |
Contact your local MyLan Printing Media Corporation representative. See the list of our Distributors at www.mylanprintingmedia.com for contact information. |
|
|
