Non-ablative, positive working, thermal digital plate with wide operating latitude,
optional postbake for extremely long runs and resistance to aggressive press
chemistry such as UV inks and blanket washes.
||0.15mm (.006”), 0.20mm (.008”), 0.30mm (.012”) and
||Kodak Trendsetter, Kodak Lotem, Kodak Magnus Platesetters, Screen PT-R Platesetters, Heidelberg Topsetter, Suprasetter Platesetters, and Luscher Xpose! Platesetters
|Laser energy required
||1% to 99% @ 250 lpi
10 micron stochastic
||Any suitable processors for positive thermal plates
||Recommended to use GSP85 Positive Plate Developer
Replenishment with GSP100 replenisher
Replenishment rate 110ml/m2
||Recommended to use ML140G Plate Finisher
30 seconds at 23°C (+/-2)
||Apply ML140B Baking Gum before baking
- Static oven: 220 – 230°C for a duration of 3 – 5 minutes
- Online oven: 240°C for a duration of 4 minutes
||120,000 impressions unbaked, 1,500,000 impressions baked.
250,000 impressions with UV or
EB inks after post baking.
(Actual run length may vary according to press, ink and paper conditions)
||None required - daylight handling
||12 months, under recommended storage conditions
||Available in all standard formats, including bulk and Auto Pallet Loader (APL) formats
|Transport and storage
||Unopened plate packs should be stored flat and away from excessive cold, heat and
humidity. Use in a controlled environment of 10° - 26°C and 40-80% RH,
||Contact your local MyLan Printing Media Corporation representative. See the list of our Distributors at www.mylanprintingmedia.com for contact information.